LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Controls And Fuel - 3.0L (Lm2) Diesel - Diagnostic Information And Procedures (2 Of 5)) >> Diagnostic Information and Procedures >> DTC P026C or P026D >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

For an overview of the component/system, refer to:

Component Description
B195 Nitrogen Oxides Sensor NOx sensors work similar to wide-band O2 sensors. The sensors consist of two measuring cells. In the first cell, an electric pump current is used to separate out the oxygen in the exhaust. The NOx remains and is conveyed into the second chamber. Here a second pump current decomposes the NOx into nitrogen and oxygen. The oxygen concentration is measured and from there the NOx concentration can be calculated.
K20 Engine Control Module The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.
Q17 Fuel Injector Fuel injectors are solenoid valves that inject fuel either into the intake system or directly into the cylinder. The amount of fuel injected depends on the length of the electrical pulse that is applied.
scientia non olet · About LEMON Manuals