X904BL Chassis Wiring Harness to Electronic Rear Vertical Accelerometer - Left Jumper Wiring Harness (Z95)
 Courtesy of GENERAL MOTORS COMPANY
|
 Courtesy of GENERAL MOTORS COMPANY
|
Connector Part Information
- Harness Type: Chassis Wiring Harness
- OEM Connector: 33358808
- Service Connector: 86792095
- Description: 3-Way F 1.2 MCON-CB Series, Sealed (BK)
|
Connector Part Information
- Harness Type: Electronic Rear Vertical Accelerometer - Left Jumper Wiring Harness
- OEM Connector: Not Available
- Service Connector: Service by Harness - See Part Catalog
- Description: 3-Way M (BK)
|
Terminal Part Information
| Terminal Type ID |
Terminated Lead |
Diagnostic Test Probe |
Terminal Removal Tool |
| I |
Not required |
J-35616-16 (L-GN) |
No Tool Required |
| II |
Not required |
No Tool Required |
No Tool Required |
| Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
Function |
Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
| 1 |
0.5 |
VT / RD |
1818 |
I |
- |
Left Rear Vertical Suspension Acceleration Sensor Voltage Reference |
1 |
0.5 |
VT / RD |
1818 |
II |
- |
| 2 |
0.5 |
BK / VT |
1833 |
I |
- |
Left Rear Vertical Suspension Acceleration Sensor Low Reference |
2 |
0.5 |
BK / VT |
1833 |
II |
- |
| 3 |
0.5 |
YE / BN |
1103 |
I |
- |
Left Rear Vertical Suspension Acceleration Sensor Signal |
3 |
0.5 |
YE / BN |
1103 |
II |
- |