Removal Procedure
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Remove the 6 rear wheelhouse liner bolts (1) from the left and right rear wheelhouse liners to gain access to the rear fascia bolt.
Remove the 2 left and right side rear bumper fascia bolts (1).
Remove the 2 left and right side liftgate adjust bumper bolts (1).
- Rear Bumper Fascia Lower Bracket Bolt (2) - Remove [4x]
Carefully push a small nylon wedge between the fascia (1) and the fascia guide. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia.
- Disconnect all electrical connectors.
With the aid of an assistant, remove the fascia. (1)