Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Upper Stiffener (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Install and tighten the left and right side front bumper fascia upper stiffener bolt (2). Fastener Specifications
Tighten the left and right side front bumper fascia upper stiffener nut (1). Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Connect all electrical connectors.
Secure the wiring harness retaining tab.
Front Headlamp - Left Side and Right Side (2) - Install [2x]
Secure the front headlamp guide pin to the front bumper fascia guide (1).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Headlamp Bolt - Left Side and Right Side (1) - Install and tighten [6x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Headlamp Bolt - Left Side and Right Side (1) - Install and tighten [6x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia (2) - Install - Front Bumper Fascia Removal and Installation (without Front Fascia Extension) , or Front Bumper Fascia Removal and Installation (with Front Fascia Extension)
After installation, aim the front headlamps. Front Headlamp Aiming (without Horizontal Adjustment) , or Front Headlamp Aiming (with Horizontal Adjustment)