LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Front Bumper Fascia Extension Replacement - Rear >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. GM5591893Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Air Deflector Bolt (1) - Remove [6x]

  3. Front Bumper Fascia Extension Bolt (2) - Remove [4x]
  4. Front Bumper Fascia Extension Bolt @ Skid Shield (3) - Remove [2x]
  5. Pull the front bumper fascia extension (4) rearward and down.
  6. If equipped, release the wire harness retainer.
scientia non olet · About LEMON Manuals