LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Front Bumper Fascia Extension Replacement - Rear >> Installation Procedure

Installation Procedure

  1. GM5591893Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Extension (4) - Install

  2. If equipped, install the wire harness retainer.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Front Bumper Fascia Extension Bolt @ Skid Shield (3) - Install and tighten [2x] - Fastener Specifications 
  4. Front Bumper Fascia Extension Bolt (2) - Install and tighten [4x] - Fastener Specifications 
  5. Front Bumper Fascia Air Deflector Bolt (1) - Install and tighten [6x] - Fastener Specifications 
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals