LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Rear Seat Track Finish Cover Replacement (60 Percent) >> Removal Procedure

Removal Procedure

  1. GM5609521Courtesy of GENERAL MOTORS COMPANY

    Place the rear seat in the fold and tumble position.

  2. Disconnect the electrical connector.
  3. Disconnect the wiring harness retainers and reposition the harness as necessary.
  4. Front Seat Bolt (1) - Remove [2x]
  5. Using a flat-bladed plastic trim tool, release the retaining clips.
  6. Rear Seat Track Finish Cover (2) - Remove
scientia non olet · About LEMON Manuals