LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Rear Seat Recliner Inner Finish Cover Replacement - Outboard >> Removal Procedure

Removal Procedure

  1. GM5599026Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Handle Bolt Cap (1) - Remove

  2. Rear Seat Riser Bolt (2) - Remove
  3. Rear Seat Adjuster Handle (3) - Remove
  4. GM5599027Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Handle Bolt Cap (1) - Remove

  5. Rear Seat Riser Bolt (2) - Remove
  6. Rear Seat Recliner Handle (3) - Remove
  7. GM5599028Courtesy of GENERAL MOTORS COMPANY

    Front Seat Bolt (1) - Remove

  8. Using a suitable plastic trim tool, release the retaining tabs.
  9. Rear Seat Recliner Outer Finish Cover - Outboard (2) - Remove
  10. GM5605753Courtesy of GENERAL MOTORS COMPANY

    Release the J-channel retainers from the rear seat cushion cover and rear seat cushion trim panel.

  11. Reposition the rear of the rear seat cushion cover and pad as necessary.
  12. Rear Seat Riser Finish Cover Retainer (1) - Remove
  13. Rear Seat Back Cover Retainer (2) - Remove
  14. Rear Seat Recliner Inner Finish Cover (3) - Remove
scientia non olet · About LEMON Manuals