Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Rear Seat Riser Finish Cover Retainer (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
Rear Seat Riser Finish Cover (2) - Remove
Place the opposite rear seat in the fold and tumble position, as necessary.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Using a flat-bladed plastic trim tool, release the retaining clip.
Rear Seat Riser Finish Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Using a flat-bladed plastic trim tool, release the retaining clips.
Rear Seat Riser Inner Finish Cover-Outboard (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Seat Latch Finish Cover (1) - Remove