Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Rear Seat Cushion Cover and Pad (1) - Remove - Rear Seat Cushion Cover and Pad Removal and Installation (60 Percent)
Courtesy of GENERAL MOTORS COMPANY

Rear Seat Riser Finish Cover Retainer (1) - Remove
Rear Seat Back Cover Retainer (2) - Remove
Rear Seat Recliner Inner Finish Cover (3) - Remove
Courtesy of GENERAL MOTORS COMPANY
NOTE:
- Note the location and routing of the seat cable to ensure proper installation.
- Quantity of retainers may vary based on option content.
Rear Seat Cable Tie (1) - Remove and DISCARD [4x]
Using a suitable tool, release the seat cable retaining features.
Release the cable ends from the seat frame.
Rear Seat Inner Recliner Cable (2) - Remove