LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Rear Seat Hinge Finish Cover Replacement - Outboard >> Removal Procedure

Removal Procedure

  1. GM5599026Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Handle Bolt Cap (1) - Remove

  2. Rear Seat Riser Bolt (2) - Remove
  3. Rear Seat Adjuster Handle (3) - Remove
  4. GM5599027Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Handle Bolt Cap (1) - Remove

  5. Rear Seat Riser Bolt (2) - Remove
  6. Rear Seat Recliner Handle (3) - Remove
  7. GM5599028Courtesy of GENERAL MOTORS COMPANY

    Front Seat Bolt (1) - Remove

  8. Using a suitable plastic trim tool, release the retaining tabs.
  9. Rear Seat Recliner Outer Finish Cover - Outboard (2) - Remove
  10. GM5605356Courtesy of GENERAL MOTORS COMPANY

    Depress the retaining tab while pulling the rear seat hinge finish cover (1) inward then upward to release from the rear seat hinge.

  11. Rear Seat Hinge Finish Cover-Outboard (1) - Remove
scientia non olet · About LEMON Manuals