LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Rear Seat Hinge Finish Cover Replacement - Inboard (Bench) >> Removal Procedure

Removal Procedure

  1. GM5608391Courtesy of GENERAL MOTORS COMPANY

    Place the opposite rear seat in the fold and tumble position.

  2. Front Seat Bolt (1) - Remove
  3. Using a suitable plastic trim tool, release the retaining tabs.
  4. Rear Seat Recliner Outer Finish Cover - Inboard (2) - Remove
  5. GM5608395Courtesy of GENERAL MOTORS COMPANY

    Depress the retaining tab while pulling the rear seat hinge finish cover (1) inward then upward to release from the rear seat hinge.

  6. Rear Seat Hinge Finish Cover-Inboard (1) - Remove
scientia non olet · About LEMON Manuals