Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Rear Seat Riser Finish Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary.
Using a flat-bladed plastic trim tool, release the retaining clip.
Rear Seat Riser Finish Cover (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Using a suitable plastic trim tool, release the retaining tabs.
Rear Seat Riser Inner Finish Cover-Outboard (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Using a suitable plastic trim tool, release the retaining tabs.
Rear Seat Riser Inner Finish Cover-Inboard (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Seat Riser Finish Cover Retainer (1) - Remove [2x]
Release the J-channel retainers from the rear seat cushion cover and rear seat cushion trim panel (2).
Courtesy of GENERAL MOTORS COMPANY

Release the remaining J-channel retainers on the rear seat cushion trim panel (2).
Rear Seat Back Opening Finish Cover Retainer (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Place the rear seat in the fold and tumble position.
Rear Seat Cushion Trim Panel (1) - Remove