Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary.
Using a suitable plastic trim tool, release the two rear seat anchor plate bezel plastic retainers.
Rear Seat Anchor Plate Bezel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Unzip the left and right rear seat back cover zippers.
Reposition the rear seat back cover, pad, J-channel retainers, and retainers as necessary.
Using a suitable trim tool, release the retainers.
Rear Seat Back Cover Retainer (1) - Remove [12x]
Rear Seat Back Panel (2) - Remove