Removal Procedure
Reposition the seat as necessary to access the bolts.
- Front Seat Bolt (1) - Remove [2x]
- Squeeze the front seat cushion outer finish cover retainer to release it from the seat frame.
- Disconnect the electrical connectors.
- Lift the front seat cushion outer finish cover (2) to release it from the front seat cushion cover wire retainer.
- Front Seat Cushion Outer Finish Cover (2) - Remove
Front Seat Adjuster Finish Cover Bolt (1) - Remove [2x]
- Front Seat Cushion Cover Retainer (2) - Remove