Removal Procedure
Front Center Seat (3) - Remove - Front Center Seat Removal and Installation
Using a suitable plastic trim tool, release the retaining clips.
- Front Seat Center Armrest Hinge Finish Cover-Upper (1) - Remove [2x]
Front Seat Center Armrest Pivot Bolt (1) - Remove
- Front Seat Armrest Adjust Retainer Bolt (2) - Remove
- Front Seat Armrest Adjust Retainer (3) - Remove
Using a suitable plastic trim tool, release the front seat center armrest hinge finish cover - lower retaining clips.
- Remove and DISCARD seat belt retaining bushings.
- Front Seat Center Belt Buckle - Remove
- Front Seat Center Belt Anchor Plate - Remove
- Front Seat Center Armrest Hinge Finish Cover-Lower (1) - Remove [2x]
Disconnect the latch release cable.
- Front Seat Center Armrest Bolt (1) - Remove [2x]
- Front Center Seat Armrest (2) - Remove
Front Seat Cushion Center Pad Pivot Bolt (1) - Remove
- Front Seat Cushion Center Pad (2) - Remove
Using a suitable plastic trim tool, release the retaining clips.
- Front Seat Center Armrest Hinge Finish Inner Cover (1) - Remove
Using a suitable plastic trim tool, release the retaining clips.
- Pull upward on the front seat back rear center cover (1) to disengage the lower retainers.
- Disconnect the electrical connectors as necessary.
- Front Seat Back Rear Center Cover (1) - Remove
- Transfer components as necessary.
NOTE:
Seat belt retaining bushings are for manufacturing purposes only.