Removal Procedure
- CAUTION:
Improper removal of the knob may result in damage to the switch.
Insert a suitable plastic trim tool under the lower edge of the knobs, and pry outwards to remove.
- Front Seat Adjuster Knob (1) - Remove
- Front Seat Recliner Knob (2) - Remove
Reposition the seat as necessary to access the bolts.
- Front Seat Bolt (1) - Remove [2x]
- Squeeze the front seat cushion outer finish cover retainer to release it from the seat frame.
- Disconnect the electrical connectors and release the wiring harness retainers as necessary.
- Lift the front seat cushion outer finish cover (2) to release it from the front seat cushion cover wire retainer.
- Front Seat Cushion Outer Finish Cover (2) - Remove
Release the retaining tabs that secure the finish cover retainer (1) to the adjuster switch assembly (2).
- Front Seat Adjuster Finish Cover Retainer (1) - Remove
- Release the retaining tabs that secure the adjuster switch assembly (2) to the outer finish cover.
- Front Seat Adjuster Switch (2) - Remove
Release the retaining tabs that secure the lumbar switch (1) to the outer finish cover.
- Front Seat Lumbar Switch (1) - Remove
Release the retaining tabs that secure the adjuster switch bezel (1) to the outer finish cover.
- Front Seat Adjuster Switch Bezel (1) - Remove
CAUTION:
The adjuster switch bezel is attached to both the seat frame and the outer finish cover. Use care when removing the outer finish cover to avoid breaking the retaining tabs.