Removal Procedure
3rd Row Seat Cushion Cover and Pad (1) - Remove - 3rd Row Seat Cushion Cover and Pad Removal and Installation (60 Percent)
- NOTE:
Some components not shown for graphic clarity.
Unzip the seat back cover zippers.
- Reposition the seat back cover and pad as necessary.
- 3rd Row Seat Hinge Finish Cover Pin (1) - Remove [2x]
- 3rd Row Seat Hinge Finish Cover - Outer (2) - Remove
- NOTE:
Some components not shown for graphic clarity.
3rd Row Seat Hinge Finish Cover Pin (1) - Remove [2x]
- 3rd Row Seat Hinge Finish Inner Cover - Inner (2) - Remove
- NOTE:
Some components not shown for graphic clarity.
3rd Row Seat Hinge Finish Cover Pin (1) - Remove
- 3rd Row Seat Hinge Finish Cover-Inside Outer (2) - Remove
- NOTE:
Some components not shown for graphic clarity.
3rd Row Seat Hinge Finish Cover Pin (1) - Remove
- 3rd Row Seat Hinge Finish Inner Cover-Inside Inner (2) - Remove
- NOTE:
Right side shown, left side similar.
{If equipped} Rear Seat Cushion Frame Dampener Bolt (1) - Remove
- {If equipped} Rear Seat Cushion Frame Dampener (2) - Remove
Pull outward and upward to release the 3rd row seat cushion pad support (1) from the seat frame.
- 3rd Row Seat Cushion Pad Support - Outer (1) - Remove
Pull outward and upward to release the 3rd row seat cushion pad support (1) from the seat frame.
- 3rd Row Seat Cushion Pad Support - Center (1) - Remove
3rd Row Seat Cushion Frame Bolt - Rear (1) - Remove [2x]
- 3rd Row Seat Cushion Frame Bolt - Front (2) - Remove [2x]
- 3rd Row Seat Cushion Frame Link Bolt (3) - Remove [2x]
3rd Row Seat Cushion Frame (1) - Remove