Removal Procedure
3rd Row Seat Back Cover and Pad (1) - Remove - 3rd Row Seat Back Cover and Pad Removal and Installation (40 Percent)
3rd Row Seat Hinge Finish Cover Pin (1) - Remove [2x]
- 3rd Row Seat Hinge Finish Cover - Outer (2) - Remove
3rd Row Seat Hinge Finish Cover Pin (1) - Remove [2x]
- 3rd Row Seat Hinge Finish Inner Cover - Inner (2) - Remove
Disconnect the electrical connector.
- Disconnect both 3rd row seat back actuator cable ends from the seat back latch.
- Using a suitable trim tool, release the cable retainers (1) from the seat back frame.
- Folding 3rd Row Seat Back Actuator Bolt (2) - Remove [2x]
- Folding 3rd Row Seat Back Actuator (3) - Remove
Disconnect the 3rd row seat back latch cable end from the seat back latch.
- Using a suitable trim tool, release the cable retainers (1) from the seat back frame.
- 3rd Row Seat Back Latch Cable (2) - Remove
Using a suitable trim tool, release the retainers.
- Rear Seat Back Cover Retainer (1) - Remove [7x]
- 3rd Row Seat Back Panel (2) - Remove
Disconnect and reposition harness as necessary.
- 3rd Row Seat Back Frame Bolt (1) - Remove [4x]
- 3rd Row Seat Back Frame (2) - Remove