Crankshaft Main Oil Seal: Remove & Replace
WARNING: This page is about the Tahoe High Country, 3.0L Eng VIN T, 4WD, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.0L Eng,4WD, Rear,w/Air Suspension | Includes: R&I Transfer Case Assembly. Includes: R&I Transmission Assembly and Flywheel. Includes: Deflating and Filling Air Suspension . Includes: Additional time for use of scan tool to perform this procedure. Includes: R&I Lower Timing Cover. Includes: Drain and refill Engine Oil. Includes: Perform Filter Life Monitor Reset procedure. Includes: Check and adjust Transmission Fluid level with fluid temperature within parameters. | 13.5 | B | |
| 3.0L Eng,4WD, Rear,w/o Air Suspension | Includes: R&I Transfer Case Assembly. Includes: R&I Transmission Assembly and Flywheel. Includes: R&I Lower Timing Cover. Includes: Drain and refill Engine Oil. Includes: Perform Filter Life Monitor Reset procedure. Includes: Check and adjust Transmission Fluid level with fluid temperature within parameters. | 13.1 | B | |
| Additional Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Where Skid Plate interferes add | 0.2 | B | ||