Pinion Shaft Seal: Remove & Replace
WARNING: This page is about the Tahoe High Country, 3.0L Eng VIN T, 4WD, which is a different variant/trim than selected.
CARRIER TYPE
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.0L Eng,4WD, Front Axle | Includes: R&I Propeller Shaft. | 2.1 | B | |
| Additional Procedure: PINION SHAFT SEAL: Remove & Replace: | ||||
| 4WD, Where Skid Plate interferes add | 0.2 | B | ||
| Combination Procedure: BRAKE PAD LIFE MONITORING SYSTEM: Reset: | ||||
| 4WD, w/Spacer Crush Sleeve Replacement | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |
| Combination Procedure: SPACER CRUSH SLEEVE: Replace: | ||||
| 4WD, Front Axle,w/Air Suspension | Includes: R&I Shock Assembly. Includes: R&I Front Axle Assembly. Includes: Additional time for use of scan tool to perform this procedure. DOES NOT include wheel alignment. | 6.9 | B | |
| 4WD, Front Axle,w/o Air Suspension | Includes: R&I Shock Assembly. Includes: R&I Front Axle Assembly. DOES NOT include wheel alignment. | 6.7 | B | |