Installation Procedure
Rear Brake Rear Pipe (5) @ Vehicle - Install
- Rear Brake Rear Pipe Fitting (3) @ Rear Brake Cylinder (4) - Install and tighten 18 N.m (13 lb ft)
- Rear Brake Rear Pipe Fitting (1) @ Rear Brake Hose (2) - Install and tighten 18 N.m (13 lb ft)
- Bleed the brake system. Hydraulic Brake System Bleeding (Manual) , or Hydraulic Brake System Bleeding (Pressure)
- Install the rear tire and wheel assembly. Tire and Wheel Removal and Installation
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .