Removal Procedure
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Battery Tray - Remove - Battery Tray Replacement (without Engine Block Heater) , or Battery Tray Replacement (with Engine Block Heater)
- Brake Pressure Modulator Valve Secondary Pipe - Remove - Brake Pressure Modulator Valve Secondary Pipe Replacement (LHD)
- Brake Pressure Modulator Valve Primary Pipe - Remove - Brake Pressure Modulator Valve Primary Pipe Replacement (LHD)
- NOTE:
Cap the brake pressure modulator valve port to prevent brake fluid loss and contamination.
Rear Brake Pipe Fitting (1) @ Brake Pressure Modulator Valve (2) - Remove
- Drivetrain and Front Suspension Cradle - Remove - Drivetrain and Front Suspension Cradle Replacement
- Fuel Feed Pipe - Remove - Fuel Feed Pipe Replacement - Underbody
- Evaporative Emission Pipe - Remove - Evaporative Emission Pipe Replacement (LV7)
Rear Brake Pipe Fitting (1) @ Rear Brake Hose (2) - Remove
Rear Brake Pipe (1) @ 1 Way Clip (2) - Unclip
Rear Brake Pipe (1) @ 2 Way Clip (2) - Unclip
Rear Brake Pipe (1) @ Mounted Clip (2) - Unclip [4x]
- Rear Brake Pipe (1) @ Clip (3) - Unclip [2x]
Rear Brake Pipe (1) @ Mounted Clip (2) - Unclip
- Rear Brake Pipe (1) @ Clip (3) - Unclip
Rear Brake Pipe (1) @ Bolted Clip (2) - Unclip [2x]
- Rear Brake Pipe (1) @ 3 Way Clip (3) - Unclip
- Rear Brake Pipe (1) @ Vehicle - Remove