LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Power Brake Booster Vacuum Sensor Replacement (LHD) >> Installation Procedure

Installation Procedure

  1. GM4007681Courtesy of GENERAL MOTORS COMPANY

    Install the power brake booster vacuum sensor (1) to the power brake booster.

  2. GM4007612Courtesy of GENERAL MOTORS COMPANY

    Connect the vacuum hose (2) to the brake booster vacuum sensor.

  3. Compress the vacuum hose retaining clamp (1) and slide along the vacuum hose (1) to the correct position, to secure the vacuum hose (2) to the power brake vacuum sensor.
  4. Connect the electrical connector to the power brake booster vacuum sensor.
scientia non olet · About LEMON Manuals