Installation Procedure
Front Brake Pipe (1) @ Vehicle - Install
- Front Brake Pipe (1) @ Brake Pipe Clip (2) - Install
Front Brake Pipe (1) @ Brake Pipe Clip (2) - Install
- CAUTION:
Refer to Fastener Caution .
Front Brake Pipe Fitting (1) @ Front Brake Hose (2) - Install and tighten 18 N.m (13 lb ft)
- Front Bumper Fascia Opening Lower Cover-Left Side - Install - Front Bumper Fascia Opening Lower Cover Replacement
- Install the left front tire and wheel assembly. Tire and Wheel Removal and Installation
EBCM/BPMV and Bracket Assembly (1) @ Vehicle - Install - Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement
- Brake Pressure Modulator Valve Primary Pipe - Install - Brake Pressure Modulator Valve Primary Pipe Replacement (LHD)
- Brake Pressure Modulator Valve Secondary Pipe - Install - Brake Pressure Modulator Valve Secondary Pipe Replacement (LHD)
- Battery Tray - Install - Battery Tray Replacement (without Engine Block Heater) , or Battery Tray Replacement (with Engine Block Heater)
- Bleed the brake system. Hydraulic Brake System Bleeding (Manual) , or Hydraulic Brake System Bleeding (Pressure)
- Lower the vehicle.