LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Spark ACTIV, Standard Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Diagnostic Information and Procedures >> DTC C0267 >> Circuit/System Verification

Circuit/System Verification

  1. Verify that the brake fluid has the proper level. The fluid level should be above minimum level.
    • Go to next step: If above minimum level 
  2. Ignition ON.
  3. Verify the scan tool Brake Fluid Level Sensor parameter. The reading should be Ok.
    • If the parameter is Low 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter is Ok 
  4. All OK.
scientia non olet · About LEMON Manuals