Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Install the lower brake shoe return spring (1).
Courtesy of GENERAL MOTORS COMPANY

Position the primary brake shoe (1) to the brake drum backing plate and connect the brake shoe to the lower brake shoe return spring.
Courtesy of GENERAL MOTORS COMPANY

Install the 2 hold-down spring and cup assembly pins (2).
Install the brake shoe hold down spring and cup assemblies (1) by compressing the spring and rotating the assembly 1/4 turn.
Courtesy of GENERAL MOTORS COMPANY

Spread the top of the brake shoes apart slightly and install the brake shoe adjuster (1).
Courtesy of GENERAL MOTORS COMPANY

Install the brake adjuster actuator lever (1).
Courtesy of GENERAL MOTORS COMPANY

Install the brake adjuster actuator lever spring (1).
Courtesy of GENERAL MOTORS COMPANY

Install the spring fastener (1) and upper brake shoe return spring (2).
Adjust the drum brakes. Refer to Drum Brake Adjustment .
Install the brake drum. Refer to Brake Drum Replacement .
Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Lower the vehicle.