K218 Front Suspension Leveling/Lifting Hydraulic Power Pack Module (E60)

Courtesy of GENERAL MOTORS COMPANY

Connector Part Information

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool
I	Not required	J-35616-42 (RD)	No Tool Required
I	Not required	J-35616-42 (RD)	No Tool Required
II	Not required	J-35616-4A (PU)	No Tool Required
III	Not required	J-35616-64B (L-BU)	No Tool Required

Pin	Size	Color	Circuit	Function	Terminal Type ID	Option
1	2.5	RD/WH	140	Battery Positive Voltage	I	-
2	-	-	-	Not Occupied	-	-
3	-	BK/GY	11883	Right Front Strut Displacement Sensor Low Reference	I	-
4 - 5	-	-	-	Not Occupied	-	-
6	-	BN/RD	11882	Right Front Strut Displacement Sensor Voltage Reference	I	-
7	0.35	BU	4987	AUTOSAR CAN Bus [+] 1 Serial Data	III	-
8	0.35	WH	4986	AUTOSAR CAN Bus [-] 1 Serial Data	III	-
9	-	BN/WH	11878	Left Front Strut Displacement Sensor Signal	I	-
10	-	YE/WH	11884	Right Front Strut Displacement Sensor Signal	I	-
11	-	-	-	Not Occupied	-	-
12	0.35	YE/BK	6121	Air Suspension Mode Switch Signal	III	-
13	2.5	BK	3050	Ground	I	-
14	-	BK/BU	11877	Left Front Strut Displacement Sensor Low Reference	I	-
15 - 16	-	-	-	Not Occupied	-	-
17	-	BU/RD	11876	Left Front Strut Displacement Sensor Voltage Reference	I	-
18	-	-	-	Not Occupied	-	-
19	0.35	BU	4987	AUTOSAR CAN Bus [+] 1 Serial Data	III	-
20	0.35	WH	4986	AUTOSAR CAN Bus [-] 1 Serial Data	III	-
21 - 24	-	-	-	Not Occupied	-	-
25	0.35	RD/GY	8540	Battery Positive Voltage	II	-
26 - 37	-	-	-	Not Occupied	-	-
38	0.35	BK	3050	Ground	II	-