Instrument Panel Knee Bolster Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Instrument Panel Outer Trim Cover Replacement
1	Instrument Panel Knee Bolster Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Panel Knee Bolster Procedure Using a flat-bladed plastic trim tool, release the retaining clips. Disconnect the electrical connectors. Transfer components as necessary.

Callout

Component Name

Instrument Panel Knee Bolster Bolt [2x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Instrument Panel Knee Bolster

Procedure