Control Valve Body Assembly Removal

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
1	Control Valve Body Assembly NOTE: The Automatic Transmission Fluid Pump Seal should stay with the Control Valve Body Assembly. Do not disassemble the Control Valve Body Assembly. The internal parts are NOT serviceable. Procedure Disconnect the main control wiring harness connector as shown. Remove the control valve body assembly.

Callout

Component Name

Control Valve Body Assembly

NOTE:

The Automatic Transmission Fluid Pump Seal should stay with the Control Valve Body Assembly.
Do not disassemble the Control Valve Body Assembly. The internal parts are NOT serviceable.

Procedure