Single Use Fasteners and Components

WARNING: This page is about a different variant/trim than selected.

Valve Rocker Arm Cover Gasket

Courtesy of GENERAL MOTORS COMPANY
IMPORTANT:
- Do not use the valve rocker arm cover gasket again. Install a NEW gasket during assembly.
- Remove the ignition bolts (1) and coils (2) before cleaning the cover in solvent. Do not submerge the ignition coils in solvent.
Inspect the covers (3) for the following conditions:
- Scoring or damage to the gasket surfaces
- Ventilation system passages for restrictions
- Threaded bolt holes for damage or debris