Single Use Fasteners and Components

WARNING: This page is about a different variant/trim than selected.

Positive Crankcase Ventilation Pipe Connector Seal

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Positive Crankcase Ventilation Pipe Connector Seal NOTE: Use a NEW O-ring.
2	Positive Crankcase Ventilation Oil Separator Drain Tube NOTE: Check valve must be replaced if tube is removed. Procedure Push retainer down on fitting to secure tube.
3	Positive Crankcase Ventilation Oil Separator Drain Tube Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)