Camshaft Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Camshaft, Camshaft Retainer And Bolts With Tightening Sequence

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Camshaft Assembly Procedure Lubricate the camshaft journals and bearings with clean engine oil. Adhesives, Fluids, Lubricants, and Sealers
2	Camshaft Retainer
3	Camshaft Retainer Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Procedure Tighten the retainer bolts in the sequence shown. NOTE: Clean the threads of the cam retainer bolts and apply a sealant. Tighten 15 N.m (11 lb ft) Adhesives, Fluids, Lubricants, and Sealers .