Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2227Condition 1
The difference between the following parameters is greater than 15.0 kPa (2.2 PSI): - Distance Traveled = Greater than 0.1 km (0.1 mi)
- BARO Sensor
- Calculated BARO
Condition 2
The difference between the following parameters is greater than 15.0 kPa (2.2 PSI): - Distance Traveled = Less than 0.1 km (0.1 mi)
- BARO Sensor
- Calculated BARO
Condition 3
BARO 50 to 115 kPa (7.3 to 16.7 PSI) - For greater than 1 s
Condition 4
MAP Sensor = Greater than 10 kPa (1.5 PSI) - For greater than 1 s
P2228
BARO = Short to Ground - For greater than 4 s
P2229
BARO = Open/Short to Battery - For greater than 4 s
P2230
BARO = Signal noisy or erratic - For greater than 4 s