Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
DTC P2122, P2123, P2127, P2128
- {P2122, P2123} DTC P06A3 = Not set
- {P2127, P2128} DTC P0697 = Not set
- Ignition = On
- Ignition Voltage = Greater than 6.4 V
Frequency the DTC runs = Continuously - After the running conditions are met
P2138
- DTC P0697, P06A3, P2122, P2123, P2127, P2128 = Not set
- Ignition = On
- Ignition Voltage = Greater than 6.4 V
Frequency the DTC runs = Continuously - After the running conditions are met