Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0231
- Ignition = On
- Ignition Voltage = Greater than 11 V
- Fuel Pump Enable Command = On
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s
P0232
- Ignition Voltage = Greater than 7 V
- Fuel Pump Enable Command = On
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 4 s
P023F
- Ignition Voltage = Greater than 7 V
- Fuel Pump Command = 30 to 60%
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s