Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0068
- Engine Speed = Greater than 800 RPM
- Ignition Voltage = Greater than 6.4 V
Frequency the DTC runs = Continuously - After the running conditions are met
P0101, P0106, P0121, P012B, P1101
- DTC P0102, P0103, P0107, P0108, P0111-P0114, P0116-P0119, P0128, P012C, P012D, P0335, P0336, P0401, P0402, P0404, P2227-P2230, P00E9, P00EA-P00EC, P042E, P010C, P010D, P111E, P14B6, U060F, U1346, U2011 = Not set
- DTC P0112, P0113, P0117, P0118, P0405, P0406, P00EA, P00EB, P14B6, P042E = Not pending
- ECT Sensor = -9 to 150°C (16 to 302°F)
- Engine Speed = 400 to 6800 RPM
- IAT Sensor 1 = -20 to 125°C (-4 to 257°F)
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s