LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Mechanical - 6.2L - Repair Instructions (1 Of 2)) >> Repair Instructions >> Valve Rocker Arm and Push Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Left Side (LT1) , or Valve Rocker Arm Cover Replacement - Left Side (LT4) , or Valve Rocker Arm Cover Replacement - Right Side (LT1) , or Valve Rocker Arm Cover Replacement - Right Side (LT4) .
  2. GM3286016Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Place the valve rocker arms, valve pushrods, and pivot support, in a rack so that they can be installed in the same location from which they were removed.

    Remove the valve rocker arm and bolt assembly (1).

  3. Remove the pushrod (2).
  4. Clean and inspect the rocker arms and/or pushrods, if necessary. Refer to Valve Rocker Arm and Push Rod Cleaning and Inspection .
scientia non olet · About LEMON Manuals