Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the oil pan. Refer to Oil Pan Replacement .
- Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
- Remove the engine coolant manifold. Refer to Engine Coolant Manifold Replacement (LT1) , or Engine Coolant Manifold Replacement (LT4) .
- Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement - Accessory (LT1) , or Drive Belt Tensioner Replacement - Accessory (LT4) .
Disconnect the electrical connectors (1).
Remove the front cover bolts (1-3).
- Remove front cover (4).
- Ensure to clean and inspect the engine front cover. Refer to Engine Front Cover Cleaning and Inspection .