Disassemble Procedure

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Lower Oil Pan, Drain Plug And Oil Filter Disassemble Components
Courtesy of GENERAL MOTORS COMPANY

Oil Pan Drain Plug (1) - Remove
Oil Pan Drain Plug Seal (2) - Remove and DISCARD
Oil Filter (3) - Remove and DISCARD
Lower Oil Pan Bolt (4) - Remove [11x]
Lower Oil Pan (5) - Remove and DISCARD
Fig 2: Exploded View Of Oil Filter Adapter Fitting, Oil Pan High Pressure Seal, Positive Crankcase Ventilation Oil Separator And Dowel Pins Disassemble Components
Courtesy of GENERAL MOTORS COMPANY

Oil Filter Adapter Fitting (1) - Remove
Oil Pan High Pressure Port Seal (2) - Remove and DISCARD
Positive Crankcase Ventilation Oil Separator Bolt (3) - Remove
Positive Crankcase Ventilation Oil Separator (4) - Remove
Positive Crankcase Ventilation Tube Seal (5) - Remove and DISCARD
Dowel Pin (6) - Remove [2x]
Fig 3: Exploded View Of Oil Pan Baffle And Engine Oil Level Indicator Switch Disassemble Components
Courtesy of GENERAL MOTORS COMPANY

Oil Pan Baffle Bolt (1) - Remove [2x]
Oil Pan Baffle (2) - Remove
Engine Oil Level Switch Clip (3) - Remove
Engine Oil Level Indicator Switch Bolt (4) - Remove [2x]
Engine Oil Level Indicator Switch (5) - Remove
Engine Oil Level Indicator Switch Seal (6) - Remove and DISCARD