Removal Procedure
Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.
In order to prevent possible contamination, cover or plug any opening when servicing the throttle body.
Air Cleaner Outlet Duct (3) - Remove - Air Cleaner Outlet Duct Replacement (LT4)
Electrical Connector (1) - Disconnect
Throttle Body Bolt (1) - Remove [4x]
- Throttle Body (2) - Remove
Throttle Body Seal (1) - Remove and DISCARD
An 8-digit part identification number is stamped on the throttle body casting. Refer to this number if servicing, or if a part replacement is required.