Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- CAUTION:
Refer to Fastener Caution .
Position the clutch slave cylinder (2) on the transmission.
- Install the clutch slave cylinder and bolts (1) and tighten to 9 N.m (80 lb in).
- Install the manual transmission to the vehicle. Refer to Transmission Replacement (MM6 with LT1 Engine, MH3 or MJK with LT4 Engine)Transmission Replacement (M13 with LGX Engine)Transmission Replacement (M13 with LTG Engine) .