Clutch System Description and Operation: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| 1 | Clutch Pilot Bearing |
| 2 | Engine Flywheel |
| 3 | Clutch Driven Plate |
| 4 | Clutch Pressure Plate |
| 5 | Clutch Actuator Cylinder |
The following components are the main parts of the clutch system:
- The driving members - attached to the engine and turning with the engine
- The driven member - attached to the driveline and transmission and turning with the driveline and transmission
- The operating members - including the spring, the clutch hydraulic system, and the clutch pedal linkages, required to apply and release the pressure, which holds the driving and driven members in contact with each other