4-5-6-7-8-9-10 Reverse Clutch Applies

WARNING: This page is about a different variant/trim than selected.

4-5-6-7-8-9-10 Reverse Clutch Regulator Valve

Shift solenoid valve F is energized and applying pressure against the 4-5-6-7-8-9-10 reverse clutch regulator valve allowing 456789-10R (20) fluid to enter the 456789-10R CLUTCH (36) fluid circuit. 456789-10R CLUTCH (36) fluid is directed to the 4-5-6-7-8-9-10 reverse clutch assembly. 456789-10R CLUTCH (36) fluid is also directed through orifice #31 into the 456789-10R CLUTCH FEEDBACK (37) fluid passage to the #4 ball check valve which seats against the FEED LIMIT - HIGH (16) fluid passage.

4-5-6-7-8-9-10 Reverse Clutch Assembly

456789-10R CLUTCH (36) fluid is directed through orifice # 34 into the 4-5-6-7-8-9-10 reverse clutch assembly. 456789-10R CLUTCH (36) fluid moves the piston against spring force to apply holding of the 4-5-6-7-8-9-10 reverse clutch plates.