Starter Shield Replacement (LT1, LT4)

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Exhaust Manifold Replacement - Right Side (LT1, LT4) Lifting and Jacking the Vehicle (ZL1) , or Lifting and Jacking the Vehicle (Convertible)
1	Starter Heat Shield Fastener CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Starter Heat Shield

Callout

Component Name

Preliminary Procedure

Starter Heat Shield Fastener

CAUTION:

Tighten
9 N.m (80 lb in)

Starter Heat Shield