Rotating Clutch, Gear, and Shaft Shell Assembly Removal (10L60)

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

DT-45053 Universal Clamp Press
DT-52090 Lifting Bar

Equivalent regional tools: Special Tools

Courtesy of GENERAL MOTORS COMPANY

Ensure that the DT-45053 Universal Clamp Press is under the boss on the input shaft shown by arrow.
DT-52090 Lifting Bar - Install
Use a hoist or chainfall to lift assembly from case.
Rotating Clutch, Gear, and Shaft Shell (1) - Remove
1-2-3-4-5-6-Reverse Clutch Apply Plate-Selective (2) - Remove
1-2-3-4-5-6-Reverse Clutch Piston Return Spring (3) - Remove [4x]
1-2-3-4-5-6-Reverse Clutch Friction Plate (4) - Remove [4x]
1-2-3-4-5-6-Reverse Clutch Steel Plate (5) - Remove [2x]
1-2-3-4-5-6-Reverse Clutch Backing Plate (6) - Remove