Control Valve Assembly Assemble
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Control Valve Body Fluid Passage Cover (1) - Install
- Control Valve Upper Body Bolt (2) - Install and tighten10.5 N.m (93 lb in)
- Control Valve Upper Body Bolt (3) - Install and tighten [3x]10.5 N.m (93 lb in)
- Automatic Transmission Fluid Pump Seal (4) - Install NEW
- Automatic Transmission Fluid Temperature Sensor (5) - Install
- Control Valve Body Fluid Passage Cover (6) - Install
Automatic Transmission Wiring Harness (1) - Install
- Automatic Transmission Control Wiring Harness Retainer (2) - Install NEW
- Control Valve Upper Body Bolt (3) - Install and tighten10.5 N.m (93 lb in)
- Automatic Transmission Wiring Harness (4) - Install
- Control Valve Upper Body Bolt (5) - Install and tighten10.5 N.m (93 lb in)
- Control Valve Solenoid Body Bolt (6) - Install and tighten10.5 N.m (93 lb in)
CAUTION:
Refer to Fastener Caution .
NOTE:
Push sensor in and turn clockwise to install.