Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Install the automatic transmission wiring harness (3). Control Valve Assembly and Transmission Wiring Harness Installation
Install the control valve body (2) and the 7 NEW control valve body assembly bolts (1) in the transmission.
-
CAUTION:
Refer to Fastener Caution .
Install the 7 bolts (1, 2, 3).
- Tighten in the sequence shown, refer to Control Valve Assembly and Transmission Wiring Harness Installation .
- Connect the transmission control wiring harness to the control valve body.
Install the automatic transmission auxiliary fluid pump outlet pipe (2). Auxiliary Fluid Pump Installation
Install the transmission fluid filter (6) and fluid pan assembly. Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement
- Perform the solenoid valve characterization reprogramming procedure. Q77 Transmission Control Solenoid Valve Characterization Programming