Special Tools
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- DT-03289-20 Holding Fixture Base Assembly
- DT-46409 Torque Converter Lifting Handles
- DT-48989 Holding Fixture
Equivalent regional tools: Special Tools
Attach and secure DT-48989 Holding Fixture (2) to the Automatic Transmission Case (3).
- Support the transmission with an overhead hoist attached to DT-48989 Holding Fixture (2).
- Install DT-48989 Holding Fixture (2) with the Automatic Transmission Case (3) into the DT-03289-20 Holding Fixture Base Assembly (1).
- Rotate the transmission so that the converter housing is up. Secure with DT-03289-20 Holding Fixture Base Assembly (1) locking pin.
Install DT-46409 Torque Converter Lifting Handles (1) to the Torque Converter (2).
- Torque Converter (2) Remove