Rotating Clutch, Gear, and Shaft Shell Assembly Removal (10L80/90)

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Rotating Clutch, Gear, and Shaft Shell Procedure Use a hoist or chainfall to lift assembly from case. Ensure that the lifting tool is under the boss on the input shaft shown by arrow. Special Tools DT-45053 Universal Clamp Press DT-52090 Lifting Bar Equivalent regional tools: Special Tools
2	1-2-3-4-5-6-Reverse Clutch Waved Plate
3	1-2-3-4-5-6-Reverse Clutch Apply Plate-Selective
4	1-2-3-4-5-6-Reverse Clutch Piston Return Spring
5	1-2-3-4-5-6-Reverse Clutch Friction Plate
6	1-2-3-4-5-6-Reverse Clutch Steel Plate
7	1-2-3-4-5-6-Reverse Clutch Backing Plate